-
-
-
- Q410
SPECS
Rated Power: 650W
Impedance: 8ohm
Coverage: 90×90
Senxitivity: 96dB
Max SPL: 126dB
Freq. Range: 60Hz-19kHz
Cabinet: Aluminium
Size: 140x191x1324mm
Component: LF8x4.5" 25mm neodymium+HF2x25mm neodymium
N.W: 12.1kg
G.W: 13.1kg
Hanging: Allow
Q410 Feature：
1. Component used 8PCS 4.5" 25mm voice coil neodymium driver and 2PCS 25mm HF drivers, passive network full range speaker.
2. 4.5" driver used fabric ring with hot pressing, powerful, high sound presure.
3. System used 2.5-6mm aluminium extrusion and stretching surface treatment for sandblasting electropaint, waterproof and anti-ultraviolet technology.
Its strength is 4.5 times of that of wooden shell, it is corrosion-resistant and has good performance4. Inside multiple X, Y axis aluminium reinforcing rib.
5. There is a long groove on each side, extend outward, have connection function.
6. Have 2 power input connector on back side, also could connect with speaker.
7. Multi screw on backside, easy to install on wall.
8. Alumium cabinet, considering the strength, especially in the horn, backrest support position, make 2.5 times thicker processing.
9. Top and Bottom used die-cast formation Nylon cover (polyarmide fiber), which is It is widely used for its excellent properties of high mechanical strength,
good toughness and anti-collision and wear resistance
10. 2PCS 8mm screws on Nylon cover, convenient for the usage of horizontally line array. At the same time, cover reserved hole.
11. Q300D single 12" subwoofer is suggested to match with, to bring a full voice.
The long groove equip with aluminium sliding block. Function:
1. Strengthen the rigidity of the shell.
2. Can serve as support point when hanging up.
3. External support.
4. Connection function when multiple speakers are used in combination.
Nylon cover：
polyarmide fiber, which is It is widely used for its excellent properties of high mechanical strength,
good toughness and anti-collision and wear resistance.
Aluminium sliding block:
Can bear 100kg tension, the position is arbitrarily fixed.
Support bracket:
Convenient placement function
